Zennio ZDIDLIV2, Technical Documentation

Page: 1 / 2

© Zennio Avance y Tecnología S.L. Edition 5 Further information www.zennio.com Page 1/2
DALI-BOX Interface v2
Interface for one DALI bus with up to 64 devices and 64 lighting groups
ZDIDLIV2 TECHNICAL DOCUMENTATION
FEATURES
•
Possibility of controlling up to 64 DALI ballasts and up to 64 lighting
groups (groups from number 17 to number 64 are only for one DALI
ballast)
•
Compatibility with emergency lighting and colour ballasts (DT8).
•
Scene sending and saving
•
Error detection and monitoring
•
Burn-in, Stand-by and Auto-off functions
•
Manual control through buttons and status indication through display
•
1.54” display (128 x 64 pixels) for settings and notifications
•
External power supply of 110-240 VAC 50/60 Hz
•
Total data saving on KNX bus failure
•
Integrated KNX BCU (TP1-256)
•
Size 67 x 90 x 79 mm (4.5 DIN units)
•
DIN rail mounting according to IEC 60715 TH35, with fixing clamp
•
DALI Standard certified
•
Conformity with the CE, UKCA, RCM directives (marks on the right
side)
1. DALI bus channel 2. Control buttons 3. Display 4. Power supply indicator LED
5. External power supply 6. Programming LED 7. Programming button 8. KNX connector 9. Fixing clamp
Figure 1: DALI-BOX Interface v2
Programming button: short press to set programming mode. If this button is held while plugging the device into the KNX bus, it enters the safe mode.
Programming LED: programming mode indicator (red). When the device enters the safe mode, it blinks (red) every half second. During the start-up
(reset or after KNX bus failure) and if the device is not in safe mode, it emits a red flash.
GENERAL SPECIFICATIONS
CONCEPT DESCRIPTION
Type of device Electric operation control device
KNX supply
Voltage (typical) 29 VDC SELV
Voltage range 21-31 VDC
Maximum
consumption
Voltage mA mW
29 VDC (typical) 6 174
24 VDC¹ 10 240
Connection type Typical TP1 bus connector for 0.8 mm Ø rigid cable
External power supply 110-240 VAC 50/60 Hz
Operation temperature -5 .. +45 °C
Storage temperature -20 .. +55 °C
Operation humidity 5 .. 95%
Storage humidity 5 .. 95%
Complementary characteristics Class B
Protection class II
Operation type Continuous operation
Device action type Type 1
Electrical stress period Long
Degree of protection IP20, clean environment
Installation
Independent device to be mounted inside electrical panels with DIN rail (IEC
60715)
Minimum clearances Not required
Response on KNX bus failure Data saving according to parameterization
Response on KNX bus restart Data recovery according to parameterization
Operation indicator
The programming LED indicates programming mode (red). The power
supply LED indicates external power (green). Display allows both
configuring the DALI system and supervising the current status.
Weight 186 g
PCB CTI index 175 V
Housing material PC FR V0 halogen free
¹ Maximum consumption in the worst-case scenario (KNX Fan-In model).
1
3
2
7
5
4
6
8
9