Zennio Z41 COM User Manual Download Page 22

Page: 22 / 169

Z41 Pro / Lite / COM

http://www.zennio.com

Tecnical Support:

http://support.zennio.com

Program version

: indicator that shows the version of the device and, on the right,

of the application program currently installed on the device. See section 1.3.1 for

more details.

IP Address

(only in Z41 Pro / Z41 COM): indicator showing the IP address of the

device. The IP address can be static (only in Z41 COM) or dynamic, assigned for

a DHCP server.

MAC Address

(only in Z41 Pro / Z41 COM): indicator showing the MAC address

of the device.

Figure 11

Configuration. Program Configuration.

Note

In Z41 COM these indicators can be found in the Device window (see section

2.3.1)

2.3.3

PROFILE

It is possible to enable the following controls for the Profile page:

Figure 12

Configuration. Profile (Left: Z41 Lite / Z41 Pro, right: Z41 COM).

Contrast

Brightness

Theme

: desired colour combination, among eight different options:

Summary of Contents for Z41 COM










































































































































































Search results

Summary of Contents for Z41 COM

Reviews:

Brands by name

Popular brands

Zennio Z41 COM, User Manual

Search results

Summary of Contents for Z41 COM

Reviews:

Brands by name

Popular brands