Tecla 55
Technical Support:
9
The following parameters are shown:
Device Orientation
[
Horizontal (Rotated) /
Vertical (Rotated)
]
1
: enables
horizontal
or
vertical
orientation to be assigned to the device, for easy
identification of the push-buttons during configuration process (ETS will show
a figure with the final distribution of the push-buttons). To prevent inconsistency
in the configuration, please note the following criterium:
Horizontal (rotated):
Proximity and luminosity
sensors on the left.
Vertical (normal):
Proximity and
luminosity sensors at
the top.
Figure 3.
Orientation.
Buttons
[
enabled
]: read-
only parameter to make it evident that the “Buttons”
tab is always enabled in the tab tree on the left. See section 2.2 for details.
Inputs
[
disabled
/enabled
]
: enables or disables the “Inputs” tab in the tree on
the left, depending on whether the device will or will not be connected an
external temperature probe. See section 2.3 for details.
Thermostat
[
disabled
/enabled
]
: enables or disables the “Thermostat” tab in
the tree on the left. See section 2.4 for details.
Heartbeat (Periodic Alive Notification)
[
disabled
/enabled
]: incorporates a
one-
bit object to the project (“
[Heartbeat] Object to Send ‘1’
”) that will be sent
periodically with value “1” to notify that the device is still working (
still alive
).
Figure 4.
Heartbeat.
1
The default values of each parameter will be highlighted in blue in this document, as follows:
[
default
/rest of options].
