Securel
Technical Support:
5
1.3
INSTALLATION
Securel connects to the KNX bus through the on-board KNX connector. Moreover, an
additional power supply
of 24 VDC is required.
Figure 2.
Securel.
Securel is connected to the external power supply through any of its three positive
terminals (1) and any of its two neutral connectors (3).
On the other hand, Securel powers the electric strike also using one of the other
positive supply terminals (1) and the terminal of the electric strike output as neutral (2).
Moreover, the relay also will power IWAC with 24VDC through its remaining terminals
(1) and (3).
Finally, the Securel communicates with IWAC through the Tx/Rx transmit and receive
terminal (4).
Figure 3.
Securel. Terminals.
1.
24VDC+ Power Supply.
2.
Electric strike output [L-].
3.
24VDC- Power Supply.
4.
Encrypted Communication.
5.
KNX Connector.
6.
Programming LED.
7.
Programming Button.
1
2
3
4
5
6
7