Zennio Securel ZIO-SEC, User Manual, Page: 10 / 13

Securel
http://www.zennio.com Technical Support: http://support.zennio.com
10
5 CONFIGURATION
5.1 GENERAL
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by right-clicking into
the device and selecting Edit parameters .
ETS PARAMETERISATION
The only parameterisable screen available is
“General”. From this screen it is possible
to configure all the required functionality.
Figure 5. General Configuration.
Opening Time : time the lock remains open after receiving the opening
command. Range: 10 to 255 tenths of a second (30 by default). The
maximum recommended opening time will depend on the lock type.
Heartbeat (Periodical Alive Notification) : incorporates a one-bit object to
the project (“ [Heartbeat] Object to Send ‘1’ ”) that will be sent periodically
with a value of “1” to notify that the device is still working (still
alive ).
Figure 6. Heartbeat (Periodical Alive Notification).