RailQUAD 8
http://www.zennio.com
Technical Support:
http://support.zennio.com
9
2.2.1
BINARY INPUT
Please refer to the specific user manual “
Binary Inputs
”, available in the RailQUAD 8
product section at the Zennio website,
http://www.zennio.com
.
2.2.2
TEMPERATURE PROBE
Please refer to the specific user manual “
Temperature Probe
”, available in the
RailQUAD 8 product section at the Zennio website,
http://www.zennio.com
.
2.2.3
MOTION DETECTOR
It is possible to connect motion detectors (models
ZN1IO-DETEC-P
and
ZN1IO-
DETEC-X
from Zennio) to the input ports of RailQUAD 8. This brings the device with
the possibility of monitoring motion and presence in the room, as well as the light level.
Depending on the detection, different response actions can be parameterised.
Please refer to the “
Motion Detector
” user manual, available under the RailQUAD 8
product section at the Zennio website (
www.zennio.com
), for detailed information about
the functionality and the configuration of the related parameters.
Notes
:
The ZN1IO-DETEC-P motion detector is compatible with a variety of Zennio
devices. However, depending on the device it is actually being connected to,
the functionality may differ slightly. Therefore, please refer specifically to the
aforementioned user manual.
Motion detectors with references ZN1IO-DETEC and ZN1IO-DETEC-N are
not compatible with RailQUAD 8 (may report inaccurate measurements if
connected to this device).
When connected to RailQUAD 8, the rear micro-switch of model ZN1IO-
DETEC-P should be set to position
“Type B”
.
