MINiBOX 0-10V X3/X2/X1
Technical Support:
7
2
CONFIGURATION
2.1
GENERAL
After importing the corresponding database in ETS and adding the device into the
topology of the project, the configuration process begins by entering the Parameters tab
of the device.
ETS PARAMETERISATION
The only parameterisable screen that is always available is
“General”. From this screen
it is possible to activate/deactivate all the required functionality. The following image
corresponds to the MINiBOX 0-10V X3. The reduced versions only show the number of
channels corresponding to each device.
Figure 2.
General. MINiBOX 0-10V X3
Channel X
[
disabled
/input/output
]
1
: enables or disables the “Analog Inputs”
(see section 2.2
) and/or “Analog Voltage Outputs” (see section 2.3) tabs on the
left menu.
Fan Coils
[
disabled
/enabled
]: enables or
disables the “Fan Coil” tab on the left
menu. See section 2.4 for more details.
1
The default values of each parameter will be highlighted in this document, as follows:
[
default
/rest of options
].