KLIC-FJ vT
Technical Support:
13
The main advantage of the autoconfiguration option is that no ETS download needs to
be done if, afterwards, it is necessary to add or remove the wired remote controller. Just
remove the power supply from the installation, connect/disconnect the wired control and,
subsequently, recover installation power would be simply enough.
ERROR TYPE CONFIGURATION
Depending on the model of A/C unit, Fujitsu define two
error types
:
“Type A ":
➢
RAC non-inverter units.
➢
RAC inverter units (till Typ A models).
➢
VRF J, S & V-series units.
“Type B":
➢
RAC inverter units (new Typ G models).
➢
VRF J, S & V-series units.
Important
:
KLIC-FJ vT must be configured selecting the error type which correspond
with A/C unit
.
OPERATION MODES
KLIC-FJ vT allows controlling the A/C unit operating mode through the following objects,
available by default:
“[AC] Mode”
: 1-Byte object which allows selecting the A/C unit operation
mode. There will be only taken in account values that are appropriated with
Figure 7. A/C Gateway. Configuration. Error type configuration.
Figure 8. A/C Gateway. Configuration. Operation modes.
