Zennio KLIC-DA LT, User Manual

Page: 11 / 20

KLIC-DA LT
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
11
3.1.1 CONFIGURATION
In the first place, it is necessary to set the desired Configuration Type , which can be
one of the following:
Basic , selected by default. This mode permits enabling and making use of
the following options:

Domestic Hot Water (DHW) , which enables or disables the DHW
function. See section 3.1.1.1.

Climate
, which enables or disables the room climate function. See section
3.1.1.2.

Error Handling
, which enables or disables the error monitoring function.
See section 3.1.1.3.
Advanced . While all of the above will still remain available, this mode brings
a few more options:
Figure 5.
Advanced Configuration Type

Temperatures (Status)
, which enables or disables the supervision of
various temperature indicators. See section 3.1.1.4

Actuators (Status) , which enables or disables the supervision of various
indicators related to the operational condition of the actuators (pump,
compressor, etc.) in the Altherma LT system. See section 3.1.1.5.