IWAC Display v3
Technical Support:
23
2.5
ACCESS CONTROL
The main functionality of IWAC Display v3 is access control. In order to properly
manage accesses is necessary the correct configuration and installation of all elements
of the system (see section 1.2 and section 1.3).
In this section certain options related to access control of the IWAC Display v3 can be
configured.
ETS PARAMETERIZATION
Figure 19.
Access Control
.
This screen contains the following parameters:
Security Parameters
➢
System ID
: this value shall be common for all IWAC Display v3 in the
installation. It is an essential part of the communication security.
➢
Device ID
: this value shall be unique for each IWAC Display v3 in the
installation. If not, the proper communication with the system is not
guaranteed. Like the previous one, this value is an essential part of the
communication security.
White List Entries (Groups)
[
disabled
/enabled
]: it is possible to configure up
to ten groups in the white list of IWAC Display v3. These groups will be
included (or updated) in the white list every start-up process.
➢
Group x
[
None
/ Guest / Visitor / Staff / Management / Service /
Cleaning / Maintenance / Security / Custom
]. Each group will be defined
