Zennio IWAC Display v2, User Manual

Page: 25 / 31

IWAC Display v2
http://www.zennio.com Technical Support: http://support.zennio.com
25
by numerical code. This identifier can only be modified when selecting
“Custom”, through parameter
ID [ 11
…65535
].
Period of Date and Time Request [
1…
30
…255
] [ x 1s ]: sending period of the
“
Request Date and Time
” object in order to receive an update of date and
time by Z-Access. This periodic sending will stop when receiving a correct
date and time.
Clear Black List After Download [ disabled /enabled ]: when enabled, the
black list will be deleted after a full download (or a partial download which
involve parameter changes). When disabled (by default) the black list will
remain after download.
Action When State Is “Do Not Disturb”
[ Allow Entry / Allow Entry On
Second Attempt / Deny Entry ]: sets the action to perform when a group with
access permission tries to access to a room in
“Do Not Disturb” status.
This action only applies to the groups; the guests of the room (cards with
individual access to the room) will always have access regardless of the room
status.
It is possible to choose from among the following actions:
➢
Allow Entry: regardless of the status of the room, any card with valid
access permissions is allowed to get in.
➢
Allow Entry on Second Attempt: in the first access attempt, the message
configured in the Texts tab (see section 2.4.2) is displayed. If there is a
second access attempt with the same card within the next 30 seconds,
access is granted.
➢
Deny Entry: the access to the room is denied directly.