IWAC Display v2
Technical Support:
11
2
CONFIGURATION
2.1
GENERAL
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering
Parameters
tab of the device
.
ETS PARAMETERIZATION
Figure 4.
General Configuration.
Inputs
[
disabled
/enabled
]
1
: enables or disables the “Inputs” tab in the tree on
the left, depending on whether the device will or will not be connected any
external accessories. See section 2.2 for details.
Buttons
[
disabled
/enabled
]
: enables or disables the “Buttons” tab in the tree
on the left, depending on whether the device will or will not be connected any
external accessories. See section 2.3 for details.
Display
[
enabled
]: read-
only parameter to make it evident that the “Display”
tab is always enabled in the tab tree on the left. See section 2.4 for details.
1
The default values of each parameter will be highlighted in blue in this document, as follows:
[
default
/rest of options
].
