Zennio FLAT 55, Manual

Page: 102 / 106

Flat 55 Display
http://www.zennio.com Technical Support: http://support.zennio.com
102
0x8 (Stop)
0xD (Inc. by
100%)
...
0xF (Inc. by 1%)
1 Bit C T - - - DPT_Switch 0/1 [Ix] [Long Press] Light On Sending of 1 (On)
1 Bit C T - - - DPT_Switch 0/1 [Ix] [Long Press] Light Off Sending of 0 (Off)
1 Bit I C T - W - DPT_Switch 0/1 [Ix] [Long Press] Light On/Off Switching 0/1
1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Ix] [Long Press] Run Scene Sending of 0 - 63
1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Ix] [Long Press] Save Scene Sending of 128 - 191
1 Bit O C T R - - DPT_Alarm 0/1
[Ix] [Switch/Sensor] Alarm: Breakdown
or Sabotage
1 = Alarm; 0 = No Alarm
2 Bytes C T - - - 9.xxx
-671088.64 -
670760.96
[Ix] [Long Press] Constant Value (Float) Float Value
2 Bytes C T - - - DPT_Value_2_Ucount 0 - 65535
[Ix] [Long Press] Constant Value
(Integer)
0 - 65535
1 Byte C T - - - DPT_Scaling 0% - 100%
[Ix] [Long Press] Constant Value
(Percentage)
0% - 100%
1 Byte C T - - - DPT_Value_1_Ucount 0 - 255
[Ix] [Long Press] Constant Value
(Integer)
0 - 255
1 Bit C T - - - DPT_Switch 0/1 [Ix] [Double Press] 0 Sending of 0
1 Bit C T - - - DPT_Switch 0/1 [Ix] [Double Press] 1 Sending of 1
1 Bit I C T - W - DPT_Switch 0/1 [Ix] [Double Press] 0/1 Switching Switching 0/1
1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Ix] [Double Press] Save Scene Sending of 128 - 191
1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Ix] [Double Press] Run Scene Sending of 0 - 63
104, 110
1 Bit C T - - - DPT_Trigger 0/1 [Ix] [Long Press/Release] Stop Shutter Release -> Stop Shutter
1 Bit I C - - W - DPT_Reset 0/1 [Ix] [Pulse Counter] Reset 0 = No Action; 1 = Reset
105, 111
1 Byte I C - - W - DPT_Scaling 0% - 100% [Ix] [Long Press] Dimming Status (Input) 0% - 100%
1 Byte I C - - W - DPT_Scaling 0% - 100% [Ix] [Long Press] Shutter Status (Input) 0% = Top; 100% = Bottom
112, 116 2 Bytes O C T R - - DPT_Value_Temp
-273.00° -
670760.00°
[Ix] Current Temperature Temperature Sensor Value
113, 117 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Overcooling 0 = No Alarm; 1 = Alarm
114, 118 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Overheating 0 = No Alarm; 1 = Alarm
115, 119 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Probe Error 0 = No Alarm; 1 = Alarm
120 1 Byte I C - - W - DPT_SceneNumber 0 - 63 [Motion Detector] Scene Input Scene Value
121 1 Byte C T - - - DPT_SceneControl 0-63; 128-191 [Motion Detector] Scene Output Scene Value
122, 151 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] Luminosity 0-100%
123, 152 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Open Circuit Error 0 = No Error; 1 = Open Circuit Error
124, 153 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Short Circuit Error 0 = No Error; 1 = Short Circuit Error
125, 154 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] Presence State (Scaling) 0-100%
126, 155 1 Byte O C T R - - DPT_HVACMode 1=Comfort [Ix] Presence State (HVAC) Auto, Comfort, Standby, Economy, Building