BIN 44 / 4X / 2X
http://www.zennio.com
Technical Support:
http://support.zennio.com
13
2.2.4.2
OUTPUT X: LED LIGHTING
–
CONFIGURATION
As already stated, each LED output allows an independent configuration of its
status
object
,
timer
and
flashing
functions.
The
Timer
function consists in performing a single, timed switch-on / switch-off cycle
when a specific trigger object is received.
On the other hand, the
Flashing
function consists in performing a continuous, timed
on/off sequence when a specific trigger object is received.
ETS PARAMETERISATION
A specific Configuration tab is provided for each enabled LED output. It contains the
following parameters:
Figure 8.
Ouput X: LED Lighting
– Configuration.
Show Status Objects
[
enabled/
disabled
]:
if enabled, the “
[LEDx] LED Status
”
object is added to the project. It
takes value ‘0’ when the LED is in the off state
an
d value ‘1’ when the LED is in the on state. This object is sent to the bus
whenever the status is updated.
Enable Timer
[
enabled/
disabled
]: enables the timer function.
➢
On Duration
[
0…
5
…255
]: sets how much time the output will remain in
the on state once the timer is activated. If set to zero, the output will not
switch off afterwards.