BIN 44 / 4X / 2X
http://www.zennio.com
Technical Support:
http://support.zennio.com
11
such cases, it will be possible to switch the mode by means of a one-bit object and/or a
scene object.
These settings are common for all outputs configured as LEDs. On the contrary,
timers
,
flashing
and
status objects
can be configured independently for each output.
2.2.4.1
GENERAL CONFIGURATION
The general configuration of the LED outputs entails setting the brightness levels for
the on and off states, both for the normal mode and for the night mode (if required).
ETS PARAMETERISATION
A general Configuration tab for the LED Outputs function is provided once at least one
output has been configured as a LED Lighting Output. This tab contains the settings
that are common to all LED outputs.
Figure 6.
LED Outputs - General configuration.
Normal Mode
[
enabled
]:
➢
On Level
[
0
…
255
]
:
sets the brightness level value for on state.
➢
Off Level
[
0
…255
]
:
sets the brightness level values for off state.
Night Mode
[
enabled/
disabled
]: in case of being this mode necessary, this
checkbox needs to be marked:
➢
On Level
[
0
…
8
…255
]
:
sets the brightness level values for on state.
➢
Off Level
[
0
…255
]
:
sets the brightness level values for off state.