10
■
The actual consumption is fully recorded in the
internal memory following an overrun and can be
retrieved via the NFC interface.
■
Unit of consumption display: m³
(for the Gal and CF display units, as well as the
x10 or x100 factors, this involves factory-preset
programmable country-specific units / factors)
Attention!
If the upper measuring limit is exceeded, the flow
rate display is deactivated and FOR = Flow Out of
Range is displayed.
During the overrun period, no consumption progress
is registered. The last overload message is stored in
the error memory as undersized detection.
Dimensions
D2
L1
L2
H2
D1
H1
B
B1
B2
Segment test / firmware version:
The segment test will be carried out every 5 minutes
and after then the firmware version is displayed.
The display then returns to the main display. The
segment test and firmware version can be also
queried via the menu level.
Consumption value:
■
DN15 to DN50, 9-digit, with 3 digits after the
decimal
place.
■
The number of decimal places may vary depend
-
ing on the unit, in the case of m³, 3 decimal places
are shown.
■
Leading zeros (pre-decimal positions) of the
consumption
display are not displayed at the start
(display 0.000 or 0.00). These are increased once
the respective volume has been reached.
■
In the event of an overrun, all leading zeros are
displayed in the consumption display
(display 000000.000).
Weight and dimensions
Nominal diameter
DN
mm
15
15
20
20
25
25
32
40
50
40
50
Zoll
1/2"
1/2"
3/4"
3/4"
1"
1"
1 1/4"
1 1/2"
2"
1 1/2" 2"
Overall length
without connectors
L2
mm
110/115 145/165/
170/190
130/160/
165/190 105
175
150/260 260
150/200/
300
300
270
FL 1
270
FL 1
Overall length with
connectors approx.
L1
mm
190/195
225/245/
250/270
226/256/
261/286 201
293
268/378 384
278/328/
428
444
-
-
Thread meter G x B
D1
Zoll
3/4"
3/4"
1"
1"
1 1/4" 1 1/4"
1 1/2"
2"
2 1/2"
-
-
Thread connector R x
D2 Zoll
1/2"
1/2"
3/4"
3/4"
1"
1"
1 1/4"
1 1/2"
2"
-
-
Width
B
mm
98.00
98.00
98.00
98.00
98.20 98.20
98.20
116.40
116.40
124.80 128
B1 mm
53.00
53.00
53.00
53.00
56.00 56.00
56.00
63.80
63.80 63.80
64
B2
mm
45.00
45.00
45.00
45.00
42.20 42.20
42.20
52.60
52.60
61.00
64
Height
H1 mm
80.00
80.00
80.00
80.00 80.00 80.00
81.20
93.20
101.00
125.70 128.7
H2
mm
25.30
25.30
25.30
25.30 22.70 22.70
23.90
29.80
37.60
61
64
Weight approx.
-
kg
0.80/0.81 0.81/0.85/
0.86/0.90
0.80/0.84
0.85/0.90 0.75
0.87
1.0/1.30
1.40
1.30/1.50/
1.90
2.30
4.65
5.7
Flange diameter
-
mm
---
---
---
---
---
---
---
---
---
150
165
Bolt circle diameter
-
mm
---
---
---
---
---
---
---
---
---
110
125
Number of bolts
-
Stück ---
---
---
---
---
---
---
---
---
4
4
Screw size
-
mm
---
---
---
---
---
---
---
---
---
M16
M16
Bolt diameter
-
mm
---
---
---
---
---
---
---
---
---
19
19
1
Flange according to ISO 7005-2
Attention: not all versions are available in all markets
