MAINTENANCE AND STORAGE
CLEANING
• Before cleaning, make sure the power switch is turned off and the power
plug is unplugged from the outlet.
• Wipe the surface of the product with a soft dry cloth.
• If the product is dirty, wipe the unit with a dry cloth moistened in diluted
neutral detergent or water and thoroughly wrung out, and then use a
clean and dry cloth to wipe the unit again. Thereafter, allow the unit to dry
naturally.
• Do not pull the zipper too hard when removing the detachable cloth cover to
avoid damage.
• Hand-wash the cloth cover with a neutral detergent.
EN
EN
CONTROL PANEL
WARNING
• NEVER IMMERSE THE PRODUCT INTO WATER OR OTHER LIQUIDS.
• DO NOT RINSE THE PRODUCT WITH WATER OR GET WATER OR OTHER
LIQUIDS INSIDE THE PRODUCT.
• DO NOT USE ABRASIVE DETERGENTS OR CHEMICALS SUCH AS THINNER
OR ALCOHOL TO CLEAN THE UNIT TO AVOID DAMAGE.
WARNING
• DO NOT SPLASH WATER OR OTHER LIQUIDS ON THE CONTROL PANEL.
• DO NOT PRESS AND HOLD THE BUTTON TOO HARD TO AVOID PROGRAM
ERRORS.
MAINTENANCE
• Prior to the maintenance work, make sure to power off the product and
disconnect the power plug from the outlet.
• Keep the unit clean and away from environments with humidity and high
temperature to avoid moisture and dust.
• When the unit is not being used for a long period of time, place a cover over
the unit to protect it from dust and direct sunlight to avoid discoloration or
deterioration on the surface of the holster.
LEG KNEE FOOT
AUTO
STRENGTH
PART
HEATING
POWER BUTTON
MODE BUTTON
HEATING BUTTON
AUTO BUTTON
INTENSITY BUTTON
