ZODIAC
601 XL
Zenith Aircraft Company
www.zenithair.com
FUSELAGE ASSEMBLY
6-B-6 Page 7 of 7
Revision 2.3 (02/05/08)
© 2002 Zenith Aircraft Co
Remove the stiffener and L angle on the front side of the firewall. Trim
the ends of 6B7-2 to fit inside the firewall flange. Mark a 10mm line on
the backside of 6B7-2 on the top. Clamp, back drill, and Cleco from the
front side of the Firewall.
P/N:
6B7-2
Firewall Reinforcement
Note:
Not all holes have
been back drilled in the
photo. Back drill all holes
through 6B7-2 at this time.
Draw a 10mm edge distance line down the L angle. Align the line on the L
angle through the predrilled holes in the Firewall. Drill and Cleco the L
angle to the Firewall.
A4 Rivets
