ZODIAC
601 XL
Zenith Aircraft Company
www.zenithair.com
FUSELAGE ASSEMBLY
6-B-6 Page 4 of 7
Revision 2.3 (02/05/08)
© 2002 Zenith Aircraft Co
Back drill and Cleco the Firewall Top Stiffener to the L angle. An angle drill
makes this easy, but is not required.
Note:
Be careful that the
Drill Chuck does not
damage the Firewall Top
Stiffener or the Firewall
when drilling.
Note:
Once you have
drilled and Clecoed two
holes through the Firewall
Top Stiffener to the L
angle, you can take them
off the Firewall to finish
drilling the remaining
holes.
Mark the flange centerline on the 40mm wide flange.
The stiffener is positioned with the centerline over the pilot holes for the top
and bottom engine mount fitting.
P/N:
6B6-3
Firewall Side Stiffener