Zenith XBV343 Installation And Operating Manual Download Page 2

2

Safety Precautions

This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric
shock to persons. 

The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the 
product.

WARNING:

Do not install this equipment in a confined space

such as a bookcase or similar unit.

NOTE TO CABLE/TV INSTALLER: 

This reminder is provided to

call the cable TV system installer’s attention to Article 820-40 of
the National Electric Code (U.S.A.). The code provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the 
building, as close to the point of the cable entry as practical.

CAUTION:

This DVD+VCR employs a Laser System.

To ensure proper use of this product, please read this owner’s
manual carefully and retain for future reference. Should the
unit require maintenance, contact an authorized service 
location.

Use of controls, adjustments, or the performance of 
procedures other than those specified herein may result in 
hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. 
DO NOT STARE INTO BEAM.

CAUTION:

The apparatus should not be exposed to water 

(dripping or splashing) and no objects filled with liquids, such
as vases, should be placed on the apparatus.

FCC WARNING: 

This equipment may generate or use radio

frequency energy. Changes or modifications to this 
equipment may cause harmful interference unless the modifi-
cations are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an
unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This product has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the product is
operated in a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be
determined by turning the product off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures: 

Reorient or relocate the receiving antenna. 
Increase the separation between the product and 

receiver. 

Connect the product into an outlet on a circuit different

from that to which the receiver is connected. 

Consult the dealer or an experienced radio/TV technician

for help. 

FCC COMPLIANCE: 

The responsible party for this product’s

compliance is: 
Zenith Electronics Corporation, 2000 Millbrook Drive,
Lincolnshire, IL 60069, USA
Phone: 1-847-941-8000.

OTES ON COPYRIGHTS:

It is forbidden by law to copy, broadcast, show, broadcast 
via cable, play in public, or rent copyrighted material without 
permission.
This product uses copyright protection developed by
Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection tech-
nology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.

SERIAL NUMBER: 

The serial number is found on the back of

this unit. This number is unique to this unit and not available to
others. You should record requested information here and
retain this guide as a permanent record of your purchase.

Model No. _________________________________

Serial No. _________________________________

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOC ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELEC-

TRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

CAUTION: 

TO REDUCE THE RISK 

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Summary of Contents for XBV343









































Reviews: