Hook-up
P A G E 6
I N S TA L L AT I O N
Your VCP has been designed to transmit a signal
to channel 3 or 4 of your TV, TO get the proper
TV signal, set the Channel 3/4 switch on the
back of the VCP to the channel that provides
the best picture.
When playing a tape, the TV
must be tuned to the same
channel (3 or 4) as the
Channel 3/4 switch on the
VCP.
Note:
This only applies when the RF OUT connection is
used. If the VCP is connected to your TV via the
Audio/Video output jacks also, choose
appropriate input source at the TV, (TV Channel
3/4 or Audio/Video In.)
Step 2: Select the Output Video Channel
3
4
Refer to the following steps to hook up your Video Cassette Player easily and quickly.
Step 1: Identify the Connectors and Switches
Locate the following connectors and switch on the back of your VCP;
1.
Video Out Jack
Video output must be used in conjunction
with audio out connection.
2.
Channel 3/4 Switch
Output video channel switch.
3.
Ant In Jack
Input from external antenna or cable-TV
Line.
4.
RF Out Jack
Output to television.
5.
DC Input Jack
Input from optional DC power source.
6.
Audio Out Jack
Audio output must be used in conjunction
with video out connection.
Note:
Use of the Audio/Video Output jacks is
optional. Depending on the capability of your
TV, you may get improved picture quality
when using these connections.
3
DC IN 12V
4
CHANNEL
RF.OUT
ANT.IN
VIDEO
OUT
AUDIO
OUT
1
2
3
4
5
6
