P A G E 2 3
206-3524-O
Video System
VIDEO SYSTEM
AUTO
MENU
RETURN
SELECT
CLAMP PULSE
0
MENU
RETURN
ADJUST
SET
NEXT
1
2
In Video or S-Video mode, press MENU but-
ton to select Source.
Select with the ADJUST button.
• When N-PAL and M-PAL signals are input,
signals cannot be received successfully in
AUTO mode. Select either N-PAL or M-
PAL.
• This setting can be done in VIDEO mode
and S-VIDEO mode only. the Video
System setting is saved for VIDEO mode
and S-VIDEO mode.
In the Clamp Pulse Menu, press ADJUST to
set Clamp Pulse range.
AUTO
NTSC
PAL
SECAM
4.43 NTSC
M-PAL
N-PAL
3
Video System can be set when the signal is connected to the Video or S-Video input terminal.
Set by adjusting to the connected signal.
Adjustment items
• Pressing the SET button moves selection to the next item.
• Set Clamp Pulse as follows depending on the connected device signal.
1 : MUSE signal (Hi-Vision - Japanese high definition video signal)
4 : NTSC, PAL, SECAM
When connecting devices other than the ones described above, adjust the clamp pulse so that the optimum image is obtained. If there is no
operation for 60 seconds, the screen display goes off.
