802700NZ - Commercial Installation Instructions - Aug 2015 - V2.01
Page 17 of 32
Booster Specifications:
Rating
Unit
Nominal Power Rating
2.2
kW
Nominal Current
10
A
Electric Supply 50Hz AC
230
V
Elect fl ex and plug (black) - 1 meter length (with 90º Australian plug)
10
A
Fixed Flow Rate
1.2
L/min
Minimum inlet pressure
200
kPa
Section 3
Booster Heater
(B240)
Mount base
Horizontally
3.1
Product Description
The boost unit is a compact electronically
controlled auxiliary water heater. It is intended to
provide pre heating of water before it enters the
Zenith HydroTap G4 boiling tank. The Booster is
supplied as standard equipment with all 240 cup
models. However, it may be later installed, as an
accessory for the 160 cup models, to increase
their delivery to 240 cups.
280mm
Note 1:
water connection
:Blue marking - water in
:Red marking - water out.
The braided hoses cannot be
lengthened.
Note 2:
The electrical cable
length is 1.0 metre.
Note 3:
Position the Booster
within reach of the fixed hose
lengths, keeping the Booster
as close as possible to the
undersink unit inlet/ outlet
fittings.
Note 4:
Ensure the Booster
heater is mounted in an
upright position (as shown)
with a horizontal base
