P A G E 3 0
206-3853
Installer Menus
Use the Installer’s Menus to make TV operation adjustments
Accessing the Installer’s Menu
Installer’s menus can be accessed by using the optional installer’s remote
control. Just press and hold MENU (about 8 seconds) until the display
changes, then press 9, 8, 7, 6, then ENTER. To exit the Installer’s Menu,
press ENTER again.
Changes you make will be stored in nonvolatile memory.
The Installer’s Menu opens with item 00-I, INST. SEQ. Use the SELECT key
to sequence through the available menu items. Or, access an item directly
by entering the line number, then pressing MENU. For example, to access
the Start Channel option which is on line 11, press 11, then MENU. To
change a current setting use the Left/Right ADJ keys.
Using the Installer’s Menu
Items 0-86 are immediately accessible only upon entering the Installer’s
Menu. Their numbers, descriptions, ranges, factory default settings, and a
place for listing any changes made on-site are given below. A second sec-
tion of the Installer’s Menu that is intended for qualified service techni-
cians only is not shown (XX-F Items). Normally these items do not require
adjustment.
Items in the Installer’s Menu: 0-I to 25-I
Menu Item
Function
Value Range
Default Value
Brief Description of Function and Comments
0-I.
INSTALLER. SEQ
0 - 3
0
Leave default set 0.
1-I.
POWER MANAGE
0 - 7
0
Sets number of hours of no activity before auto shutoff.
2-I.
AC ON
0 / 1
0
Set to 1 to enable auto turn on at power up.
3-I.
BAND/AFC
0 - 7
0
Tuning band, see detailed descriptions.
4-I.
STRT CHANNEL
0 - 255
255
Channel at turn-on (255 last Ch).
5-I.
CHAN LOCK
0 / 1
0
When set to 1, cannot tune from current channel.
6-I.
GHOST CH
0 / 1
0
Set to 1 to enable Ghost Channel display.
7-I.
START VOLUME
0 - 63, 255
255
Volume level at TV turn-on (Set 255 to retain last volume level).
8-I.
MIN VOLUME
0 - 63
0
Minimum volume setting.
9-I.
MAX VOLUME
0 - 63
63
Maximum volume setting.
10-I.
MUTE DISABLE
0 / 1
0
Set to 1 to disable mute function.
11-I.
KEY DEFEAT
0 / 1
1
Set to 1 to disable Menu, Select, and Adj keys on front panel.
12-I.
IR BANKS EN.
0 / 1
0
Set to 1: enables TV to respond to IR codes to change Channel Bank directly.
13-I.
SCAN MODE
0 - 3
1
Typically used for Hospitals: puts On-Off and FM in Ch Up/Down sequence.
14-I.
STRT CH IN SM
0 / 1
0
Set to 1 to put TV on/off below start channel number.
15-I.
SLEEP TIMER
0 / 1
1
Set to 1 to enable Sleep Timer.
16-I.
EN. TIMER
0 / 1
1
Set to 1 to enable Timer.
17-I.
ALARM
0 / 1
1
Set to 1 to enable Alarm.
18-I.
RADIO
0 / 1
1
Set to 1 for TVs with Radio.
19-I.
NOT USED
20-I.
FEATURE LEVEL
0 / 1
1 Zen 1
Leave default set 1 (1 Zen 1)
21-I.
V-CHIP
0 / 1
1
Set to 1 to enable V-Chip
22-I.
MAX BLK HRS
0 - 99
12
Select number of Parental Control blocking hours.
23-I.
CAPTION LOCK
0 / 1
0
Set to 1 to retain caption setting at turn off.
24-I.
TEXT MODE
0 / 1
1
Set to 1 to add Text option to closed caption menu.
25-I.
FUNCTION PRE.
0 - 3
0
Controls channel preview in Pay-Per-View function menu.
OIMCRMIO42A 01.34 01
00-I. INST. SEQ.
0
SN:XXXX-XXXXXXXX
UPN:XXX-XXX-XXX-XXX
XX/XX/XX
TE = 10110000
XX-F Menu Items (Not shown here)
are service-type adjustments and only
qualified technicians having special-
ized test equipment should access
them.
