Zenith HDR230, Installation And Operating Manual, Warranty

Page: 32 / 44

Recording Setup Options
32
Normal Recording
11
Select the desired channel with CH (+/-).
2 2
Press RECORD/EDIT once.
Recording will start. The menu as illustrated to the left, will appear on the
TV screen.
3 3
Press
3 3
/
4 4
repeatedly to select the recording time length.
Each press of
3
/
4
button changes the recording duration in the
sequence shown below.
No Limit
→
30 min
→
60 min
→
90 min
→
120 min
→
180 min
→
210 min
4 4
Press RECORD/EDIT again.
The elapsed recording time indicator appear on the screen. Press EXIT
to remove indicator.
5 5
Press STOP to stop recording.
Recording Reservation using Program Guide
11
Press GUIDE.
The Program Guide menu will appear.
2 2
Select a program to be aired in the future from the Program Guide
then press
(SELECT).
A dialog box for the program will appear.
3 3
Move the highlight to the “Reservation” option in the dialog box and
press (SELECT) to
confirm.
You will see “ “ on the left side of the program title to indicate to you
that the program is reserved. The reserved program will be stored in the
Program List. You can check if the program is added in the Program List
by pressing Program List.
4 4
Press GUIDE or EXIT to remove the Program Guide screen.
ote
• If the disk space available is insufficient while recording, the message will
appear on the TV screen. (“Recording is completed. Turn off STB?”) The
receiver will turn off when you select “Yes” then press
(SELECT) or
when no button is pressed for 1 minute.
Recording Reservation using RESERVED REC button
11
Press RESERVED REC button.
The Recording Reservation menu appears.
2 2
Follow steps 5-6 as shown for Reservation Settings, General
Operation on page 29.
otes
• If the disk space is insufficient while recording, the receiver will turn itself off.
• If you want to stop recording, you must press STOP button. If you press
POWER to stop recording, the program may not be recorded.
• A blocked channel can be recorded but a black screen will be shown
during recording.
• Duration may be indicated “0” if recording reservations is activated
abnormally. (ex. When the disk space available is insufficient, no signal,
incorrect program time, PVR error, etc.)
Using the Program List
Press PROGRAM LIST button to display the Program List menu.
Refer to Program List Settings General Operation on page 30 to see
detail description.