Zenith DVD2381, Operating Manual

Page: 14 / 52

Connecting to a TV equipped with component video inputs
PROGRESSIVE SCAN: Some TVs or monitors are equipped with component video inputs that are capable of
reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest
quality pictures with less flicker.
COMPONENT VIDEO OUT: Some TVs or monitors are equipped with component video inputs. Connecting to these
inputs allows you to enjoy higher quality picture playback.
■
To switch the output signal (Progressive/Component)
Set the Progressive to “On” on the SETUP menu for Progressive signal, or set the Progressive to “Off” on the SETUP
menu for Component video signal.
VIDEO
OUT
L
R
S-VIDEO
OUT
Pr
Pb
COMPONENT
VIDEO OUT
PROGRESSIVE
SCAN
COAXIAL
VIDEO
OUTPUT
DIGITAL
OUT
OPTICAL
DIGITAL
OUT
AUDIO
OUT1
AUDIO
OUT2
L
R
COMPONENT /
PROGRESSIVE
SCAN
S-VIDEO
Y
To COMPONENT VIDEO OUT/
PROGRESSIVE SCAN (Pb, Pr, Y)
VIDEO OUTPUT SELECT switch
To AUDIO OUT (L/R)
Audio cable (Supplied)
To component video input or
progressive scan video input
To audio inputs
Video cable (Pb, Pr, Y) (Not supplied)
TV or monitor with component
video or progressive scan inputs
❍ Refer to the owner’s manual of your TV as well.
❍ Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
❍ Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, -Y, B-Y or Y, Cb, Cr)
❍ In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a
case, adjust the TV or monitor for optimum performance.
Notes
When using COMPONENT VIDEO OUT/PROGRESSIVE
SCAN jack, set the VIDEO OUTPUT SELECT switch to
COMPONENT/PROGRESSIVE SCAN.
PAGE 14 CONNECTIONS