background image

PAGE 6

INTRODUCTION

Precautions

When shipping the DVD player, always use the 
original shipping carton and packing materials.
For maximum protection, repack the unit as it was
originally packed at the factory.

Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic 
products in contact with the DVD player for a long
time. They will leave marks on the finish.

The top and rear panels of the DVD player may
become warm after a long period of use. This is 
normal and not a malfunction.

When the DVD player is not in use, be sure to
remove the disc and turn off the power.

If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on
and use the DVD player occasionally.

When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, move the DVD
player away from the TV, radio, or VCR.

Use a soft, dry cloth for cleaning.

For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry. Do not use any type of solvent, such as thinner
and benzine, as they may damage the surface of the
DVD player.

If you use a chemical saturated cloth to clean the
unit, follow that product’s instructions.

Warning: Cleaning and adjustment of lenses
and/or other components of playback mechanism
should be performed by a qualified service 
technician.

The DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality becomes poor. To obtain
a clear picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every
1,000 hours of use depending on the operating 
environment. For details, contact your nearest dealer.

Moisture condensation damages the DVD player.
Please read the following carefully.

Moisture condensation occurs, for example, when
you pour a cold drink into a glass on a warm day.
Drops of water form on the outside of the glass. In
the same way, moisture may condense on the opti-
cal pick-up lens inside this unit, one of the most cru-
cial internal parts of the DVD player.

Moisture condensation occurs during the following
cases.

When you bring the DVD player directly from a cold
place to a warm place.

When you use the DVD player in a room where you
just turned on the heater, or a place where the cold
wind from the air conditioner directly hits the unit.

In summer, when you use the DVD player in a hot
and humid place just after you move the unit from
an air conditioned room.

When you use the DVD player in a humid place.

Do not use the DVD player when moisture con-
densation may occur.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player and leave it “ON” for
two or three hours. After two or three hours, the
DVD player will have warmed up and evaporated
any moisture. Keep the DVD player connected to
the wall outlet and moisture condensation will sel-
dom occur.

Notes on handling

Notes on Locating

Notes on Cleaning

To Obtain a Clear Picture

Notes on  Moisture Condensation

Ex

ampl

es of moistu

re

con

densation

Optical

pick-up lens

It’s too

warm!

Wait!

Summary of Contents for DVC2515












































Reviews: