Zenith D60WLCD Series, Service Manual, Page: 30 / 88

SERVICE ADJUSTMENTS
D60WLCD - 923-03486
3-6
094A - SERVICING
DISASSEMBLY INSTRUCTIONS
Refer to the exploded view when using the following
instructions.
1. Remove part 307 by prying one end out slightly.
Grip and pull forward.
2. Carefully loosen one end of part 306. Pull this
piece forward carefully; do not bend this piece
excessively. Note: the double-sided tape across the
top must remain intact.
3. Remove the lower back, part 420.
4. Remove the screws from the outer edges of part
410.
5. Remove the 9 screws from the lower portion of
part 300.
6. Remove the front screen ass’y carefully. Note: un-
plug the speaker wires and the two cables to the
front keyboard ass’y.
7. Unplug the cable from location 630.
8. Remove the two screws from the lower center of
location 410.
9. Move part 410 slightly forward then up.
10. Remove the metal support bracket from the center
of part location 303.
11. Remove the screws along the sides and across the
top of part 303.
12. Lift up and back slightly, 303 should be removed
easily.