Zenith Concierge H20C35DT, Installation And Operating Manual, Warranty

Page: 13 / 48

P A G E 1 3
206-3489-O
Front Panel Controls
AUDIO VIDEO
CAPTION VOL VOL CH
CH
OFF
ON
IN
LEFT RIGHT
1
4
Press ON/OFF to turn on your TV.
To access the menus press the MENU button on
the control panel. Cycle through the various
menus by pushing the button repeatedly.
Press the SELECT button repeatedly to highlight
the option you want to modify.
Press either the Right or Left ADJUST button to
modify the option you have chosen.
Press CAPTIONS to turn captions on and off.
The menu will disappear after a few seconds.
Use the front control panel to access the menus or just operate the TV
Note: Item 10 Key Defeat, in the installer’s menu allows the installer to:
Set Menu Option 10, Key defeat to “0” - Front panel controls give access to menus.
Set Menu Option 10, Key defeat to “1” - Menus not available with front panel controls.
1
2
3
4
5
The Front Audio/Video jacks are a direct source con-
nection. If you have a device plugged into the front
Video jack, you will not be able to change channels
until you have unplugged the front Video jack.
Front panel control menu operation buttons are not
labeled and are not usually available to the guest.
You can use Ch to select channels and Vol to set the
volume level regardless of the key defeat setting.
2
3
There are three jacks on the front of the TV that make con-
necting Audio/Video devices like camcorders very simple.
To use the front jacks as the signal source, simply plug a
composite video cable into the VIDEO jack. The TV will auto-
matically change its source setting to CAMPORT, as indicated
on the channel selection screen.
Video
Connects the video signals from any piece of
equipment.
Left/Right Audio Used for stereo sound from
various types of equipment.
Typical Front Panel Controls
5