206-3483
P A G E 3 8
Programming the Remote
Mini glossary
PROGRAMMING
Procedure to set up remote to operate other equipment.
PRG
Programming mode key.
DEVICE
Infra-red remote controllable electronic accessory equipment.
1
2
3
4
5
6
Set up your remote to operate other IR controlled brand name devices:
VCRs, Cable Boxes, TVs, Satellite Receivers, DVD Players, Audio CD Players, Audio Tape Decks,
Audio Tuners and Amplifiers etc. See listing on pages 42/43
PRG
POWER
CABLE
VCR
AUX
TV
SURF
ENTER
FLASHBK
MUTE
CHANNEL
CHANNEL
VOLUME
VOLUME
1
2
3
4
5
6
7
0
8
9
MENU
REWIND
FFWD
RECORD
QUIT
PIP
PIP ch
FREEZ
CC
TV/VCR
SOURCE
PAUSE
TIMER
PLAY
STOP
7
4
6
Programming your Zenith remote may allow you to use one remote
to work up to 7 different devices.
Not all devices will work with your Zenith remote control.
5
3
Turn on the device you want to program.
On the chart on page 42/43, find the type of device you’re
programming, and then find the brand name. Make a note of
the three-number code, you’ll need it soon.
Press and hold PRG. It’s recessed so it doesn’t get pushed
accidentally. Use a small, blunt object. When the indicator
light turns on, you can release PRG.
Push the key name with the type of device you’re program-
ming (VCR, CABLE, AUX, TV).
Using the NUMBER keypad, enter the three-number code you
found on page 42/43.
Press ENTER to save the code. (The indicator light will flash 3
times, then turn off to indicate the code is valid.)
Point the remote at the device and push POWER. It should
turn off. If not, try the other codes listed and continue from
step three.
Notes
• To reset remote to factory settings, enter 9-1-1, in Step 5.
• After programming, be sure to press the mode key first to
operate the device you have just programmed.
7
Indicator Light
Summary of Contents for C32C84R Series
Page 50: ...Notes 206 3483 P A G E 5 0...
