background image

Page 30 of 32                                                    802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00

Home Menu Icons

Safety switch is LOCKED.

 

The HydroTap will not dispense any Boiling water.
See page 3 for safety switch operation

Safety switch is UNLOCKED. 

Boiling water may be dispensed. See page 7 for tap 
operation details

Sleep mode is active.

There are 7 sleep mode options which display this 
icon on the home screen. See page 23 for details.

Heater is in OFF mode.

 

When this icon is displayed, no power is being 
supplied to the heating element. See page 24.

Filter use.

This icon displays the filter usage remaining from 
100% (New filter) to 0% (end of life). When it 
reaches 0% the filter warning light on the tap head 
will flash slowly.
The filter life can be adjusted by litres and by days 
used. See page 22

50%

Boiling Temperature

The set temperature of the water in the Boiling tank 
will be displayed. This is optimises at 98

°C but may 

be adjusted between 68°- 100°. See page 21 for 
hot set point adjustment.

BOILING 

98

°

C

CHILLED 

3-5

°

C

Chilled Temperature

The set temperature of the water in the Chiller tank 
will be displayed. This is will range from 3-5

°

C

Summary of Contents for 802006NZ

































Reviews: