background image

www.zenitel.com

Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. VINGTOR-STENTOFON products are developed and 

marketed by Zenitel. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice. 

ZENITEL PROPRIETARY.

 This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is 

prohibited, if not otherwise explicitly agreed in writing with Zenitel. Any authorized reproduction, in part or in whole, must include this legend: Zenitel – All rights reserved.

 

[email protected] 

DOC NO.

A100K10873

The WEEE Directive does not legislate that Zenitel, as a ‘producer’, shall collect ‘end of life’ 

WEEE.

This ‘end of life’ WEEE should be recycled appropriately by the owner who should use proper 

treatment and recycling measures. It should not be disposed to landfill. 

Many electrical items that we throw away can be repaired or recycled. Recycling items helps to save our 

natural finite resources and also reduces the environmental and health risks associated with sending electrical 

goods to landfill.

Under  the  WEEE  Regulations,  all  new  electrical  goods  should  now  be  marked  with  the 

crossed-out wheeled bin symbol shown.
Goods are marked with this symbol to show that they were produced after 13th August 

2005, and should be disposed of separately from normal household waste so that they can 

be recycled.

Summary of Contents for Vingtor Stentofon VSP 12-Way





















Reviews: