20
②
. Change the engine oil.
③
. Remove the spark plug, and pour about a tablespoon of clean engine oil into the cylinder. Crank
the engine several revolutions to distribute the oil, then reinstall the spark plug.
④
. Slowly pull the starter grip until resistance is felt. At this point, the piston is coming up on its
compression stroke and both intake and exhaust valves are closed. Storing the angina in this,
position will help to protect it from internal corrosion.
9. TROUBLESHOOTING
when the engine Mill not start:
Summary of Contents for GDAW190AC
