Zenit Powertools ED-550 PROFI, Instruction Manual

Page: 4 / 8

4
cords intended for outdoor use.
19. Stay alert. Watch what you are doing.
Use common sense. Do not operate tool
when you are tired.
20. Check damaged parts. Before further
use of the tool, a guard or other part that
is damaged should be carefully checked
to determine that it will operate properly
and perform its intended function. Check
for alignment of moving parts, free run-
ning of moving parts, breakage of parts,
mounting and any other conditions that
may affect its operation. A guard or other
part that is damaged should be properly
repaired or replaced by an authorized
service center unless otherwise indicated
in this instruction manual. Have defec-
tive switches replaced by an authorized
service center. Do not use the tool if the
switch does not turn it on and off.
21. Warning Use only accessories or at-
tachments recommended in this instruc-
tion manual or in the catalogue of ZENIT
ТМ.
22. Have your tool repaired by a qualified
person. This electric tool is in accordance
with the relevant safety requirements. Re-
pairs should only be carried out by quali-
fied persons using original ZENIT TM
spare parts. Otherwise this may result in
considerable danger to the user.
safety precautions on usinG
screwdriver
• Before drilling into walls, ceilings or
floors, ensure that there are no concealed
power cables inside.
• Always keep the tool handle and the
side handle firmly. Otherwise the counter
force may lead to inaccurate or even
dangerous operation.
description
1. Chuck
2. Torque control
3. Switch
4. Speed control
5. Stopper
technical specifications
Model ED-550 profi
Rated power 550 W
Rated voltage 220-240 V
Rated frequency 50-60 Hz
Chuck size 10 mm
No load speed 0-750 rpm
applications
Screwing and unscrewing of screws
and bolts during installation, decoration
and construction work as well as some
types of household mechanical work and
woodwork.
Torque mechanical adjustment is pro -
vided.
prior to operation
1. Power source.
Ensure that the power source to be uti-
lized conforms to the power requirements
specified on the product nameplate.