High Performance Output Filter – IP00 Series
IM00168
Installation Considerations
CAUTION
The High Performance Output Filter must be mounted on a vibration free surface, away from heat radiating
sources. Do not mount the High Performance Output Filter in direct sunlight or on a hot surface.
In selecting an enclosure for the High Performance Output Filter and any associated equipment, the total
heat dissipation and resulting temperature rise in the enclosure must be considered.
Attention is drawn to the potential for condensation in vulnerable environments. Additional precautions may
be required for all enclosure types.
The installation location and environment should provide for safe access and working conditions for service
personnel. Do not mount the High Performance Output Filter in “confined spaces”
2
Do not drill holes in the High Performance Output Filter.
Do not allow metal shavings or any other conductive material to enter the enclosure or damage may result.
Operating Considerations
Zener recommends that the associated ZENER 8000 inverter be set for an audible switching frequency of
2kHz.
2
Confined spaces are generally defined in Workplace Health and Safety (WH&S) regulations to mean spaces where
special precautions are necessary to ensure a safe breathing atmosphere, or there is limited access for escape/rescue
in case of emergency.
