ZENER VARIDRIVE SOLUTIONS
ZENER ECODRIVE® 8000
IM00130
P a g e
| 21
20/07/2018 3:59 PM
KEYPAD OPERATION
Programming
The basic keypad function is:
ENTER:
To ENTER a menu or save a parameter
EXIT:
To exit or go back without saving
UP:
To scroll upward through a menu or increase a parameter value
DOWN:
To scroll downward through a menu or decrease a parameter value
STOP:
No function
To access menu: Press ‘ESC’, then ‘DOWN’ to scroll through menu’s
IMPORTANT NOTE:
The ECODRIVE will ask you to save changes, ensure you press enter to save otherwise all changes
will be lost. Ensure the ECODRIVE has completed the saving process before power is switched off to the unit.
Local Operation
In LOCAL MODE, the basic keypad function is:
ENTER:
No function for local operation
EXIT:
No function for local operation
UP:
To go FORWARD or INCREASE SPEED
DOWN:
To go REVERSE or DECREASE SPEED
STOP:
STOPS the pump/motor or resets a ‘TRIP’ condition
For the local keypad to function, ‘REMOTE’ must be disabled or switched off using a ‘remote’ input (default D4, terminal 5).
When ‘LOCAL’ mode is enabled, the speed reference may be configured to a different source other than the keypad.
Remote Operation
When ‘REMOTE’ mode is active the digital inputs have start/stop control. The speed reference is configured within the menu
from various sources. This also includes PID operation.
Refer to the ZENER 8000 instruction manual.
ESC
ESC
