12
RADIO MODE
SELECT RADIO AS PLAYING SOURCE
■
Open the SOURCE MENU and then touch the RADlO icon.
SELECT ONE RADIO BAND
■
Press the [BAND] key on the display panel or on the remote control or touch the
[BAND] icon on the user interface to select one radio band among FM1, FM2, FM3,
AM1 and AM2.
AUTO TUNING
■
Press the [
]/[
] key on the display panel or on the remote control or touch the [
]/[
]
icon on the user interface to seek a higher/lower station. To stop searching, repeat the
operation above or press other keys having radio functions.
NOTE:
■
When a station is received, searching stops and the station is played. If the unit
receives a stereo broadcasting, the indicator light of stereo 'ST' on the TFT or on the
LCD display will be lighted.
MANUAL TUNING
■
During manual tuning, the frequency will be changed in steps. Press the [
]/[
] key on
remote control or touch the [
]/[
] icon on the user interface to tune in a higher/lower
station.
■
Touch the numeric keypad icon [
S
] and then touch the numeric buttons to input the
radio station frequency numbers.
AUTO SAVE
■
Only stations with sufficient signal strength will be detected and stored in the memory.
When the monitor is closed, press and hold the [AS/PS] key on the display panel.
■
When the monitor is opened, touch the [AS] icon on the user interface.
■
To stop auto save, press other keys having radio functions.
NOTES:
■
After auto save, the previous saved stations will be overwritten.
■
The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store 6
stations; hence the unit can store 30 stations in total.
