ZENEC ZE-NC514, Software Manual, Page: 143 / 152

65
65
Time and Time Zone Settings:
Button Description
Auto Time Correction to GPS Use this feature to synchronise the clock of your device to the highly
accurate time provided by the GPS receiver.
Use Auto Time Zone
Use this feature to synchronise the time zone of the clock of your
device to the time zone based on your current GPS position. This is
useful if you travel abroad.
Set Time Zone Set time zone manually if you do not want to synchronise the time
zone automatically. This allows you to use Auto Time Correction and
apply a time zone offset to obtain the desired time.
Compare GPS and device
times
The current time of the GPS receiver and the device clock are
displayed. Please note that the GPS clock is only available with GPS
reception. This allows you to check whether any correction is needed.
4.5.5 Menu settings
You can modify the look and behaviour of the Menu screens. Tap the following buttons: ,
, .
Button Description
Background
You can choose the image to be used as the menu background
image.
4.5.6 TMC settings
Note! This feature is available only if your hardware supports TMC.
You can set up the connection to the TMC receiver. If the TMC receiver is working, you can select the
radio station to be received. Tap the following buttons: , , .
If there is no TMC receiver connected to ZENEC Navigation Software, you have the following options:
Button Description
No TMC Hardware Found!
The first line of the screen informs you about the connection status of
the GPS receiver.
Connecting the TMC receiver is automatic in ZENEC Navigation
Software, so normally you will not need this screen of settings at all.
Protocol
The communication protocol used between the TMC receiver and the
application.
Port
The communication port used between the TMC receiver and the
application.
ZE-NA2000_UserManual_UK.indd 65 23.04.2009 10:43:18 Uhr