44
DEUTSCH
ENGLISH
45
INSTALLATION AND UNINSTALLATION
trim ring installation
■
Attach the trim ring around the front panel with two indentions on one side facing upwards.
uninstall
disassemble trim ring
1. Push the trim ring upward and pull out the upper part.
2. Push the trim ring downward and pull out the lower part.
disassemBle the unit
1. unscrew the 4 pieces m2 x 2 screws.
2. use a screw driver to bend straight the bended mounting tab and tip out the unit from the
mounting bracket.
3. Pull out the unit from the mounting bracket with both hands.
unscrew 4
attached screws
Remove the rubber sheath
SPECIFICATIONS
general
Reference Supply Voltage ........................................................................................12V (DC)
Operating Voltage Range.............................................................................10.5~15.8V (DC)
max Operation Current .................................................................................................... 10A
grounding System ........................................................................ Car battery negative Pole
installation Dimension (wxhxD) ..........................................178mm x 50mm x (165+25) mm
installation Angle ........................................................................................................ 0°~30°
net weight .....................................................................................................................2.3kg
fm
Signal noise Ratio ......................................................................................................... 55db
Residual noise Sensitivity (S/n=30db) .....................................................................20dbµV
Frequency Response (±3db) ......................................................................... 40hz~12.5khz
Station Seeking level ......................................................................................... 20~30dbµV
Distortion ........................................................................................................................1.5%
Stereo Separation (1 khz)............................................................................................. 20db
Antenna impedance ........................................................................................................75Q
am
Residual noise Sensitivity (S/n=20db) .....................................................................40dbµV
Selectivity (±9khz) ........................................................................................................ 50db
dvd player
Signal/noise Ratio ......................................................................................................... 90db
Dynamic Range ............................................................................................................. 90db
Distortion (line out) ........................................................................................................ 0.1%
Frequency Response (±3db) ............................................................................ 20hz~20khz
max Output Power ...................................................................................................... 4x40w
load impedance ................................................................................................................4Ω
aux in
Distortion ....................................................................................................................... 0.5%
Frequency Response (±3db) ............................................................................ 20hz~20khz
Audio input level ......................................................................................................0.4Vrms
audio
Audio Output impedance ...............................................................................................200Ω
Audio Output level ............................................................................................2Vrms (max)
(under normal audio input level and maximum volume)
