ENGLISH
77
BLUEtOOtH MODE
CoNNECTioN
There are two connection modes according to the built-in bluetooth
working modes.
Phone connection
There are four connection modes.
1. Connect after power on
The built-in bluetooth will auto connect with the mobile phone
that has been connected at the last time in 10s from power on.
2. Manual connect
You can establish the connection between the bluetooth and
your mobile phone by sending connection order from your
mobile or pressing the connection button [ ] on the user
interface when the built-in bluetooth and your mobile phone
disconnected if you have set the ‚connect‘ option of ,bluetooth‘
of ‘setup‘ to ‚Manual‘.
3. Auto connect
After disconnecting with your mobile phone, the built-in
bluetooth will send connection order automatically in 20s if
you have set the ‚connect‘ option of ‚bluetooth‘ of ,setup‘ to
‚Auto‘.
NoTE:
■
After the connection has been established, ‚Connected‘ will be
displayed on the user interface until the built-in bluetooth gets
your mobile phone name. Your mobile phone name and the
signal intensity will be displayed after the built-in bluetooth has
got your phone information.
■
If you have transferred voice to your mobile phone during talking
and haven‘t transferred voice back to the built-in bluetooth
before hangup, auto connection will expire, so you should
connect the built-in bluetooth with your mobile phone manually
for the next time.
■
Some mobile phones will shut down its bluetooth power after
disconnecting and the built-in bluetooth cannot connect with
them under this condition.
4. Disconnect
You can break the connection between the built-in bluetooth
and your mobile phone by operating your phone or pressing the
disconnection button [ ]. After disconnecting, ‚Disconnected‘
will be displayed on the user interface and the signal intensity is
empty.
stereo connection
There are three connection modes.
1. Connection request from the built-in bluetooth
Changing the work mode of the built-in bluetooth to stereo
mode, pressing the connection button [ ] on the user interface,
the built-in bluetooth will connect with your mobile phone and
your mobile phone will open the audio playback software.
2. Connection request from your mobile phone
Opening audio playback software of your mobile phone, playing
one audio file, setting playback mode to bluetooth, selecting
the built-in bluetooth from the bluetooth device list, the built-
in bluetooth will change the work mode to the stereo mode
automatically.
If the built-in bluetooth can not be found in the device list of
your mobile phone, you should pair and connect your mobile
phone with the built-in bluetooth first.
