130
Message displayed
Cause
Corrective action
Loading
1.
Disc is being read.
No Disc
1.
Disc is dirty.
1.
Clean disc with soft cloth.
2.
Disc is upside down.
2.
Insert disc with label side up.
3.
Disc not present in loading
compartment.
3.
Insert disc.
Bad Disc
1.
Disc is dirty.
1.
Clean disc with soft cloth.
2.
Disc is upside down.
2.
Insert disc with label side up.
Unknown Disc
1.
Disc format is not compatible with this
unit.
Region Error
1.
DVD is not compatible with the region
code of unit.
Error
1.
Illegal mechanism operation.
1.
Press the “EJECT” button for 5 seconds to
reset loading mechanism.
CARE AND MAINTENANCE
1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor.
A rough cloth and non neutral detergent (such as alcohol) may result in scratching or
discoloration.
2. Do not get water or cleaning fluids on the unit.
3. If the temperature inside the player gets too hot, a protective circuit automatically stops
the playback of the disc. If this occurs, allow the unit to cool before operating the player
again.
4. Never insert anything other than a 5" (12 cm) compact disc into the player as the
mechanism can be damaged by foreign objects.
5. Do not attempt to use a 3" (8 cm) CD-single disc in this unit, either with or without an
adaptor, as damage to the player and/or disc may occur. Such damage is not covered
by the warranty on this product.
6. The CD player may not operate properly in extreme hot or cold temperature. If such
conditions occur, allow the interior of the vehicle to reach a normal temperature before
using the player.
7. When the vehicle warms up during cold weather or under damp conditions, condensation
may appear on the LCD panel. Should this occur, the screen will not operate properly
until the moisture has evaporated.
8. We suggest to use a cleaning disc in this unit more frequently than in the unit in your
home due to the environmental conditions of the vehicle.
ERROR MESSAGES
ZE-MC192 Manual D+E def.indd 130
13.09.2007 17:33:16 Uhr
