Zendure SolarFlow ZDSPVH1200, User Manual, Page: 33 / 40

13
3
4
The Zendure App gives users the ability to allocate the power to AB1000
and home grid and monitor power generation,the power to micro-inverter
can be set in a range of 100-1200W.
Read the Zendure App user guide and access the download link here:
https://eu.zendure.com/pages/download-center.
Using the device for the first time, you need to update the firmware via
the Zendure App.More information ,please check the Zendure App user
guide.
The maximum solar input power of SolarFlow system is 800W, you can set
the power to microinverter, and the excess power will be automatic stored
in the battery.For example：
If the total solar input is 800W ,you set 200W to microinverter, and then
there will be 600W input AB1000.
* Add device and Update to the latest firmware version
* Set the power to the microinverter
Privacy Policy
By using Zendure Products, Applications and Services, you
consent to the Zendure Terms of Use and Privacy Policy,
which you can access via the "About" section of the "User"
page in the Zendure App
Note:
• After completing the connection, please turn on SolarFlow (press the IOT
button for 2 second).
• You must connect AB1000 first and then connect the solar panels.
5.3.8 Download the Zendure app
Connect AB1000 to Smart PVHub with the battery cable,The terminals
of battery cable can be self-locking, when you hear a click, you have
inserted the battery cable well.
Connect Smart PVHub to microinverter, first connect the "1 to 2 MC4
connector" to smart PVHub,then connect to the microinverter with
microinverter cable and another 2 MC4 expand cables.
Connect the microinverter to the home socket with your original cable.
Connect the solar panel to Smart PVHub.
1
2
EN