ZD-VT1 User Guide
Copyright © 2016 ZENDA GPS All rights reserved. - 12 -
status, press 3; query a location, press 4; listen-in, press 5. Thank you." Then you press 1 to set arming.
Set by SMS command: Set arming or disarming by SMS command.
SMS command: 0000,B21,Status
Response: IMEI,B21,OK
Note:
When
Status
is
1
, enable the anti-theft function. While arming, opening the vehicle door and starting the ACC are
not allowed. Otherwise, the ZD-VT1 will send an alarm SMS and make a call to the preset authorized phone number.
When
Status
is
0
, disable the anti-theft function. While disarming, all anti-theft alarms will be cleared. The device is
in disarming state by default.
Function
Call
SMS
Engine
Cut
Buzzer
Remarks
Opening
the
vehicle
door
√
√
√
When the vehicle door is opened without permission, the buzzer
will sound continuously until the anti-theft state is cancelled. The
tracker will dial the three authorized phone numbers in sequence
and send SMSs.
Starting the engine
√
√
√
√
When the engine is started, the vehicle fuel will be cut off, and the
buzzer will sound continuously until the anti-theft state is
cancelled. The tracker will dial the three authorized phone numbers
in sequence and send SMSs.
Setting arming
while
driving (Intercepting the
moving vehicle )
√
√
After the vehicle is stolen, you can send a GPRS/SMS command to
intercept the moving vehicle. When the vehicle speed is lower than
5 km/h, the engine will be cut off, and the tracker will send an alarm
to authorized phone numbers.
Towing alarm
√
√
√
When the ACC is off and vibration occurs continuously, a towing
alarm will be generated. The tracker will dial the three authorized
phone numbers in sequence and send SMSs.
Engine cut: Output ports are activated, implementing remote fuel and power cut-off functions. For details, see section 8.2.5
"Remote Power Cut-off."
For details about SMS commands, see the
ZENDA SMS Protocol
.
Note:
1.
The default SMS command password is
0000
. You can change the password by using ZENDA Manager and SMS
commands.
2.
The device can be configured by SMS commands with a correct password. After an authorized phone number is set, only
the authorized phone number can receive the preset SMS event report.
7
ZENDA Tracking System
Visit www.zendatracking.com, enter the user name and password, and log in to the ZENDA tracking system. (Purchase the login
account from your provider.)
For more information about how to add a tracker, see the
ZENDA GPS Tracking System User Guide
.
The ZENDA tracking system supports the following functions:
Track by time interval or distance.
Query historical traces.
