Zenchef H01-1599A, Instruction Manual

Page: 15 / 47

HOW TO USE THE TIMER BUTTON:
If you wish to Program your pressure cooker to automatically cook
prepared food at a later time, you can program the pressure cooker to
delay cooking by up to 24-hours.This setting is used in combination with
the MENU BUTTON SELECTIONS in the chart shown on page 13 and with
the PRESSURE COOK TIME BUTTON.
1. Prepare desired food and place into cooking pot.
2. Secure the Lid (2) onto the unit, turn it Counter-clockwise to lock it in
place.
3. Make sure the Pressure Limiting Valve (3) is set to the "Airtight" position.
4. Plug the power cord into a 120V power outlet.
5. The LED screen will display 00 00.
6. Press the preset time button. The LED screen will show 0:30 which is
equal to 30 minutes of delay time. Then press the "+/-" button to adjust
the delay time, Press +/- once for each 0.5-hour increase or decrease ,it can
hold for rapid increase/decrease. The maximum Delay period is 24-hours
.(The time that displays on the LED screen shows how long the user wants
the unit to wait before the cooking process begins.)
7. EX: If you wish to program the pressure cooker to automatically turn on
in 3-hours, press the DELAY TIMER button until the LED screen displays
3:00
8. After programming a Delay time of 3 hours, choose your MENU BUTTON
MENU SELECT BUTTONS:
Select one of the menu buttons.
Follow the instructions under "AFTER SELECTING A MENU BUTTON."
9. Press start button, the delay timer counts down.
10. Once the pressure cooker completes its countdown, the unit will begin
operation of the cooking sequence for the chosen selection.
14