1. Switch off the unit.
2. Twist the hopper anti clockwise then lift off (See Fig 9).
Lift the bowl straight up to remove from
the base.
3. Disassemble the parts from the juicing bowl in the order show by the diagram (see Fig 10).
4. Use the brush to clean all of these parts
thoroughly in warm soapy water then dry thoroughly. Ensure
the pulp outlet on the juicing bowl is clear(the end of the cleaning brush is designed to clear trapped material
from the pulp outlet). Unplug the rubber stopper for easier access to the pulp outlet.
5. Use a damp cloth to wipe down the Main Body of the unit.
C A U T I O N
Before juicing ensure the rubber stopper is firmly in place(See Fig 2)
D I S A S S E M B L E A N D C L E A N T H E U N I T
6
Periodically remove the silicone brushes from the spinning brush and clean thoroughly before reassembling.
Thoroughly clean immediately after each use to minimize staining.
Pull out the rubber stopper on the Main Body of the Juicing bowl to clean Juicing bowl effectively. Always
ensure the rubber stopper is re-inserted prior to juicing otherwise it may cause a leak.
Do not use harsh abrasives or chemicals to clean the juicer.
Do not clean in the dish washer.
24
