PITCHING INSTRUCTIONS
This Pro Link provides a weather tight connection between a Pro Series tent
awning and an Aerobase 3 or Aerobase 3 Pro Shelter.
1. First pitch your tent.
2. Zip on the
Pro Link to the front awning of your tent.
3. Pitch your
Aerobase 3 in front of your tent awning and in line with the Pro Link but do not at
this stage place any of the pegs in the ground.
4. Zip the remaining side of the
Pro Link to the entrance of the Aerobase 3.
5. Move the shelter so that the
Link is pulled trim/tight and aligned straight with the awning of
your tent. Ensure the walls of the shelter sit square.
6. Once correctly aligned peg down the
Aerobase 3 into position and inflate.
Condensation
It is important that lower vents are opened at all times to reduce the risk of condensation. During
humid or damp conditions, it is recommended that the waterproof door covers are opened to
expose the mesh layer, enabling additional airflow throughout your tent.
Do not use foam swabs or non-bonded mats directly on the tent floor. This will cause
condensation between the mat and floor and if not dried out, can lead to mildew forming.
Aerobase 3
Tent
Pro Link
W W W . Z E M P I R E C A M P I N G . C O M
For a detailed description of all the features and specifications
of this product please visit our website.
Designed and tested in New Zealand. Made with care in China.
UV Degradation
Tent fabrics can be weakened by prolonged exposure to sunlight. Under normal holiday use, your
ZEMPIRE
®
tent will give you many years of camping enjoyment. However, extended use in strong
sunlight will cause degradation. UV degradation is not covered under warranty. The warranty
does not cover permanent sites, displays or commercial use.
