Zelmer ZVC382ST, Instructions Manual

Page: 19 / 24

25
ZVC382-001_v01
VACUUM CLEANER TYPES
VIB
Workmanship
and
equipment
option
Type
Adjustable suction power
SAFBAG dust bag
module/“CYKLON” dust container full indicator
No SAFBAG dust bag module/“CYKLON” dust container protection
Dust
compartment
Outlet filter
Suction tube
Combination brush
Small nozzle
Crevice nozzle
Small brush Turbo brush
Parquet brush “BNB”
„CYKLON” compartment „SAFBAG” dust bag
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
ZVC382ST VC2750.0ST + + + +
SAFBAG
1 piece HEPA H11
Telescopic with
a blocking mechanism
+ + + + + +
ZVC382SP VC2750.0SP
+ + + +
SAFBAG
1 piece HEPA H11
Telescopic with
a blocking mechanism
+ + + + – +
9 Power decrease button
10 Suction power level indicator
11 Power increase button
12 Upper cover fastening
13 Basic HEPA H10 filter (installed in the vacuum cleaner)
14 Basic filter protective mesh (installed in the vacuum
cleaner)
15 “CYKLON” dust container
16 Suction hose
17 Telescopic suction tube
18 Outlet filter HEPA H11 (installed in the vacuum cleaner)
19 Inlet filter (installed in the vacuum cleaner)
20 Inlet filter casing (installed in the vacuum cleaner)
21 SAFBAG dust bag module (with the installed SAFBAG
dust bag)
22 Parquet brush “BNB”
Is used to clean and polish hard, scratch sensitive surfaces
such as wooden floors, floor panels, parquet, marble, tiles, etc.
Delicate and soft natural bristles ensure maximum vacuum
effectiveness and protects against scratching the cleaned
surface.
23 Combination brush with a small item separator
24 Turbobrush (type VC2750.0ST)
25 Small nozzle
26 Crevice nozzle
27 Small brush
Preparing the vacuum cleaner for
operation
The Clarris Twix vacuum cleaner has two alternative dust
collecting modules which can be selected by the user:
–
The bagless “CYKLON” dust container with the HEPA
filter – where the dust is “whirled” and deposited in the
container.
B
Technical parameters
The type of the vacuum cleaner and the technical parameters
are indicated on the rating label. Mains protection 16 A.
Does not cause interferences with audio/video devices.
Does not require grounding
.
ZELMER vacuum cleaners meet the requirements of the
applicable norms.
The appliance is in conformity with the requirements of the
directives:
–
Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
Noise level: 81 dB(A).
The appliance was marked by a CE sign on the rating label.
Static electricity
In the process of vacuuming of some surfaces in areas of
low air humidity the device may become electrically charged.
It is a natural phenomenon – it does not damage the device,
and it is not considered to be a fault.
In order to minimize the phenomenon, we recommend you to:
●
discharge the device by touching metal items in the room
with the pipe,
●
increase air humidity in the room,
●
use widely available antistatic agents.
Appliance elements
A
1 Accessory compartment cover
2 Combination brush fastening
3 Plug and cord
4 Outlet filter cover
5 Cord rewind button
6 Handle
7 ON/OFF button
8 Dust bag full indicator