104
JE1200-002_v05
JUICE EXTRACTOR
DESCRIPTION OF THE APPLIANCE
Your juice extractor is designed for fast fruit and vegetable
juice centrifuging with automatic separation of pulp.
Centrifugation speed was carefully selected to ensure
excellent quality juices. Small particles of fruit (or vegetable)
contained in the extracted juice are healthy, but may affect
the clarity of juice. This is an intended effect, as keeping
the highest nutrient, health and dietetic values of your
juices is more important than their clarity. The quantity of
juice obtained with 1kg of fruit or vegetables depends on
their freshness, cleanness of the filter and condition of the
shredding disc (e.g. for fresh carrots it is 50-60%). All parts
in contact with processed products are made of materials
suitable for contact with food.
Preparing for operation
DISASSEMBLING
Before first use, disassemble the appliance and
wash all parts in contact with processed fruit or
vegetables.
1
Press the locking clamps all the way down to release
the lid.
2
Remove the pusher and the lid.
3
Slide out the pulp container.
4
Remove the juice bowl with the strainer by turning the
bowl counter-clockwise so that the symbol on the bowl is
aligned with the symbol
on the motor unit. Remove the
juice bowl from the motor unit.
Wash all parts (except the motor unit) carefully in
warm water with some washing liquid. You can
also clean them in a dishwasher at max. 60°C
(except the juice bowl, strainer and motor unit).
Dry all parts thoroughly and replace once dry.
ASSEMBLING
1
Place the juice bowl on the motor unit, aligning the
symbol
on the underside of the bowl with the symbol
on the motor unit.
2
Lock the juice bowl by turning it clockwise so that the
symbol on the motor unit is aligned with the
symbol on
the underside of the bowl.
3
Mount the strainer on the skimmer so that the notch on
the skimmer is aligned with the groove in the strainer.
The strainer may be mounted in one position
only.
4
Slide the pulp container under the lid as follows: lean the
pulp container and place it under the insert of the bowl so
that the protrusion in the pulp container is placed inside the
groove in the bowl. Then slide it in towards the motor unit.
B
C
5
Install the lid so that the protrusion of the lid is in the
notch of the juice bowl.
6
Lift up both clamps and clamp them onto the fasteners
located on the lid.
7
Press the clamps to the juice bowl (a characteristic click
indicates that they are clamped correctly).
8
Put the juice collector so that the juice spout is inside the
collector.
If you fail to assemble the locking clamps
correctly, a safety device will prevent the
switch-on of the appliance.
Prepare washed fruit and vegetables and place
them near the appliance.
Juice extractor start up and operation
●
Make sure control knob is set to position
“0”
.
●
Insert the plug into the wall outlet and run the juice
extractor turning the control knob as required to speed
1 or 2 (see the table
“Recommended centrifugation
speeds for selected fruits and vegetables”
).
●
Put the fruit or vegetables into the hopper of the cover
and lightly press them with pusher.
Do not push products with your fingers or
other objects.
●
Transfer the extracted juice from the container into
glasses, cups, etc.
The jug has a lid with a froth separator to stop
coarse juice particles and froth.
●
If necessary (if excessive pulp deposited on the strainer
causes vibrations) use the
“PULSE”
function.
PULSE FUNCTION
The
“PULSE”
function allows to remove excessive pulp on
the strainer. Turn and hold the control knob to
“PULSE”
to
operate the appliance at maximum speed. Release the knob
to stop the appliance.
After each use
●
Turn the control knob to
“0”
to switch off the appliance.
●
Unplug the appliance.
●
Once the motor unit stops, disassemble the appliance to
wash all parts (see
“DISASSEMBLING”
).
●
Remove all pulp from the pulp container.
Do not allow the overflow of the tank for
leftovers. When you pull it out, accumulated
surplus of leftovers may fall from the tank
when tilting.
Summary of Contents for ZJE1205G
