Zelmer ZGS1700, User Manual

Page: 8 / 44

8
PL EN
optimal use, pass the steam jets over your garment from top to bottom.
As steam is very hot: never attempt to remove creases from a garment while it is being worn, always
hang garments on a clothes hanger.
The fabric brush opens the weaves of the fabrics for better steam penetration. Before removing or at-
taching the steam brush, unplug your appliance and allow it to cool down.
During use or while unit is heating or cooling do not rest appliance on its head. Place the product on a
stable, heat resistant, flat surface, as the head will be hot. As the appliance heats, the housing becomes
warm. This is normal.
Remove the main plug from the wall socket. Wait for an hour for your appliance to cool before storing.
Auto shut-off
This product is fitted with an automatic switch-off system. This stops the product from heating up if it is
resting on its base and is not moved for about 8 minutes.
MAINTENANCE AND CLEANING
After use it, please remove the water tank, empty the water tank completely, and then return the water
tank to its place.
Before cleaning the garment steamer ensure it is unplugged from the power supply and has completely
cooled down.
Do not use abrasive cleaners.
To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as
these will damage the surface.
ADVISE ON DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and electronic
devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal
framework applicable in the European Union for the disposal and reuse of waste electronic
and electrical devices. Do not dispose of this product in the bin, instead going to the electri-
cal and electronic waste collection centre closest to your home.
We hope that you will be satisfied with this product.