31
ZCM4821-001_v01
Coffee mug
approx. 190 ml
Coffee cup
approx. 120 ml
Espresso cup
approx. 40 ml
●
In order to reduce heat loss and splashing, adjust the height of the dispenser to suit
your cup size by moving it up or down.
If the height adjuster is difficult to move, clean it. Proceed as described in
section “REMOVING AND CLEANING THE COFFEE DISPENSING UNIT”.
●
Press the
button to dispense hot water.
You can stop hot water dispensing prematurely by briefly pressing the
menu button.
CHANGING AND STORING THE CUP FILLING LEVEL IN HOT WATER MODE
The coffee machine is set for standard quantities by default. You can set the cup filling
level individually for each cup size. Proceed as follows:
●
Select the “hot water” function by pressing the button
B
.
●
Press the button
C
repeatedly until the required cup symbol for the desired ground
coffee quantity is displayed.
●
Place an appropriate cup under the coffee delivery spout (e.g. coffee mug).
●
Then press the
button and hold it pressed until the desired cup filling level is
reached.
●
Release the button. The desired cup filling level is now stored.
Repeat the procedure if you also wish to change the filling level for the
other cup sizes.
All values remain stored even when the coffee machine is switched off.
Should you change your cup size, you can adapt the cup filling level
individually at any time or reset the filling level with a “Reset”. The settings
affected are described in section “RESETTING THE COFFEE MACHINE TO
FACTORY SETTINGS”.
The stored cup filling levels for each individual cup symbol only applies in
hot water mode.
PREPARING COFFEE SPECIALITIES
The milk system must be connected in order to dispense coffee specialities. Refer to
section “CONNECTING THE MILK SYSTEM”.
Dispense hot water into the cups to heat them.
Do not use soya or rice milk because good frothing results are not possible
with these products.
The milk type of milk used can influence the milk froth quality.
●
Select the “coffee specialities” function by pressing the button
B
. The following
appears on the display:
●
Select the desired coffee speciality by pressing the button
C
. The following selections
are possible:
Latte Macchiato
Cappuccino
Café Latte
●
Place one or two cups under the coffee dispensing spout.
When preparing Latte Macchiato, push the drip tray and the cup grate
into the coffee machine completely and place two glasses onto the Latte
Macchiato rest.
The coffee machine has default factory settings. If you wish to change
these settings, refer to the instructions in section “CHANGING AND
STORING SETTINGS FOR COFFEE SPECIALITIES”.
The settings for coffee specialities (milk-coffee proportion, coffee filling
quantity and froth quantity) remain stored even when the coffee machine is
switched off.
●
In order to reduce heat loss and splashing, adjust the dispensing spout height to suit
your cup/glass size by moving it up or down.
If the height adjuster is difficult to move, clean it. Proceed as described in
section “REMOVING AND CLEANING THE COFFEE DISPENSING UNIT”.
●
Select the desired ground coffee quantity by pressing the button
A
. The following
selections are possible:
“only milk” “extra light”
“light”
“normal”
“strong” “extra strong”
If you select the coffee ground quantity “only milk”, you can warm up hot
milk.
The ground coffee quantity is set separately for each beverage.
The last ground coffee quantity set remains stored even when the
appliance is switched off.
●
Press the
button to dispense the coffee speciality.
●
Press the
button once to heat a cup. The following appears on the display:
●
Press the
button a second time to heat two cups. The following appears on
the display:
You can still switch between one cup or two cups during the grinding
process by pressing the
button.
Summary of Contents for ZCM4821B
Page 43: ...ZCM4821 001_v01 ...
